蓖麻油基巯烯基紫外光固化胶粘剂的研制与性能研究

以异佛尔酮二异氰酸酯(IPDI)、蓖麻油(CO)、丙烯酸羟丙酯(HPA)为原料,采用熔融缩聚法合成出端丙烯酸酯基预聚体;同时以CO和3-巯基丙酸(3-MPA)为原料采用酯化反应合成出端巯基光引发单体。将端不饱和双键聚氨酯丙烯酸酯预聚体与所制备巯基丙酸酯按一定比例复合,加入光引发剂,在紫外光照射下,预聚体中双键与光引发单体中巯基发生巯基-烯点击反应,制得聚氨酯丙烯酸酯固化膜。采用核磁共振氢谱(1 HNMR)、红外光谱(FT-IR)、热重分析(TG)和光量热系统(Photo-DSC)等手段对合成预聚体、巯基丙酸酯及固化膜结构和性能进行了分析表征。结果表明:在紫外光辐照下,预聚体中不饱和双键与巯基化合物中巯基间发生了自由基加成反应,固化时间在60s以内,且所制备UV固化膜具有良好的机械性能和热稳定性。     

Activation of Cellulose Assisted by CO2 for the Preparation of a Superhydrophobic Nanocoating

There is increasing demand for superhydrophobic materials, which can be used for separating oil and water efficiently. To avoid secondary pollution, it is desirable to prepare such materials with green technology. Here, we present an environmentally benign method for fabricating superhydrophobic materials by using organic base based solvents in which cellulose can be dissolved and activated. The dissolved cellulose could be chemically modified with a silanization reagent, and the solvent could be recycled after CO₂ was removed. The obtained cellulose nanocoating exhibited excellent hydrophobic effects. By spraying it on filter paper (water contact angle (WCA)=165°) for oil and water separation, the separation efficiency of more than 95 % was achieved; ultrasonication of an ordinary sponge in its dispersion (WCA=163°), meant it could be used as an oil absorber. It can also absorb a certain amount of bisphenol A (BPA), with the concentration decreasing by 66 % from the original concentration (0.1 mm ). Besides the high separation efficiency, it is resistant to a wide range of pH solutions, which means that it could be used in harsh environments. More importantly, the process is cost‐effective, the solvent can be recycled, and the whole process is green. Thus, the activation method provides a green route for the preparation of other cellulose‐based materials.     

Development of a novel hollow‐fiber liquid‐phase microextraction based on oil‐in‐salt and its comparison with conventional one

A novel hollow‐fiber liquid‐phase microextraction based on oil‐in‐salt was proposed and introduced for the simultaneous extraction and enrichment of the main active compounds of hesperidin, honokiol, shikonin, magnolol, emodin, and β,β′‐dimethylacrylshikonin in a formula of Zi‐Cao‐Cheng‐Qi decoction and the single herb, Fructus Aurantii Immaturus , Cortex Magnoliae Officinalis , Radix et Rhizoma , and Lithospermum erythrorhizon , composing the formula prior to their analysis by high‐performance liquid chromatography. The results obtained by the proposed procedure were compared with those obtained by conventional hollow‐fiber liquid‐phase microextraction, and the proposed procedure mechanism was described. In the procedure, a hollow‐fiber segment was first immersed in organic solvent to fill the solvent in the fiber lumen and wall pore, and then the fiber was again immersed into sodium chloride solution to cover a thin salt membrane on the fiber wall pore filling organic solvent. Under the optimum conditions, the enrichment factors of the analytes were 0.6–109.4, linearities were 0.002–12 μg/mL with r ² ≥ 0.9950, detection limits were 0.6–12 ng/mL, respectively. The results showed that oil‐in‐salt hollow‐fiber liquid‐phase microextraction is a simple and effective sample pretreatment procedure and suitable for the simultaneous extraction and concentration of trace‐level active compounds in traditional Chinese medicine.     

胜利断块油藏细分注水技术界限研究

老油田进入特高含水期后,剩余油分布更加零散,各种地质因素也因长期注水开发而发生了一定的改变.此时稳油控水难度进一步加大,为了进一步挖掘剩余油,控制含水上升速度、减缓产量递减,必须对注水井采取进一步的细分调整.基于水湿油藏注水井注水层段吸水效果,从注入水受力分析入手,运用达西定律推导出了水驱油藏水驱油全过程中的单位体积注入水沿竖直、地层两个方向运移的渗流速度公式,明晰了水驱油藏注水层段不同开发阶段砂岩吸水机理.研究结果表明,水驱油藏细分注水效果与岩石绝对渗透率、水相相对渗透率、注入水黏度、水动力压力梯度、注水井启动压力梯度、含水饱和度、地层倾角、油水密度差等参数有关.结合胜利油田断块油藏地质特征及细分注水工艺要求,制定了一套适合胜利油田不同断块区的细分注水技术政策界限:层段内渗透率变异系数小于0.3,砂岩条带宽度极比小于2.5,且东辛油区断块油藏层段内砂岩厚度小于6m,小层数小于4个;现河油区断块油藏层段内砂岩厚度小于5m,小层数小于5个;临盘油区断块油藏层段内砂岩厚度小于6m,小层数小于6个.矿场试验证实,该细分注水技术政策界限是合理、实用的,其为胜利断块油藏注上水、注够水、注好水,实现多层断块油藏的高效开发提供了技术保障,对类似油藏细分注水技术界限研究具有一定的借鉴意义.     

Deep eutectic solvent-based modified quick,easy, cheap,effective, rugged,and safe extraction combined with solidification of floating organic droplet-dispersive liquid–liquid microextraction of some pesticides from canola oil followed by gas chromatography analysis

Herein, a modified quick, easy, cheap, effective, rugged, and safe extraction was developed based on deep eutectic solvent for the extraction of several pesticides from canola oil samples. In this work, first, different sorbents were selected to remove the sample interferences, and the composition of the sorbents was optimized by simplex centroid design. The extracted analytes were more concentrated by solidification of floating deep eutectic solvent droplet-dispersive liquid–liquid microextraction. Low limits of detection (0.15–0.23 ng/g) and quantification (0.49–0.76 ng/g), high extraction recoveries (74–87%) and enrichment factors (224–263), and good repeatability (relative standard deviation equal to or less than 5.1 and 4.7% for intra- and interday precisions, respectively) were achieved using the proposed method. The suggested approach was used for the quantification of the analytes in different canola oil samples. Additionally, the effects of microwave irradiations exposure and sonication in decontamination of the samples were evaluated. In this method, there was no need for centrifugation and toxic solvents. Also, effective extraction of the analytes and minimizing interferences were achieved through the use of various sorbents.     

Multifunctional Fluorinated Lubricant-Infused Poly(4-Hydroxybutyrate) (P4HB) Membranes for Full-Thickness Abdominal Wall Defect Repair

Abdominal wall defect caused by surgical trauma, congenital rupture, or tumor resection may result in hernia formation or even death. Tension-free abdominal wall defect repair by using patches is the gold standard to solve such problems. However, adhesions following patch implantation remain one of the most challenging issues in surgical practice. The development of new kinds of barriers is key to addressing peritoneal adhesions and repairing abdominal wall defects. It is already well recognized that ideal barrier materials need to have good resistance to nonspecific protein adsorption, cell adhesion, and bacterial colonization for preventing the initial development of adhesion. Herein, electrospun poly(4-hydroxybutyrate) (P4HB) membranes infused with perfluorocarbon oil are used as physical barriers. The oil-infused P4HB membranes can greatly prevent protein attachment and reduce blood cell adhesion in vitro. It is further shown that the perfluorocarbon oil-infused P4HB membranes can reduce bacterial colonization. The in vivo study reveals that perfluoro(decahydronaphthalene)-infused P4HB membranes can significantly prevent peritoneal adhesions in the classic abdominal wall defects’ model and accelerate defect repair, as evidenced by gross examination and histological evaluation. This work provides a safe fluorinated lubricant-impregnated P4HB physical barrier to inhibit the formation of postoperative peritoneal adhesions and efficiently repair soft-tissue defects.     

MOFs for desulfurization of fuel oil: Recent advances and future insights

Nowadays, desulfurization of fuel oil has raised concern globally because of strict industrial and environmental legislations. Albeit hydrodesulfurization (HDS) has been extensively used in oil refineries to produce low sulfur oil (< 10 ppm) but not been proven as effective method for the removal of dibenzothiophene (DBT), benzothiophene (TH) and their derivatives. Subsequently, adsorptive desulfurization (ADS) and oxidative desulfurization (ODS) methods have been developed to achieve high removal efficiency. In the past decade, metal–organic frameworks (MOFs) and its composites as oxidative catalysts, as well as adsorbents, have attracted the researchers owing to high surface area, tunable properties, and reusable. The present review comprises use of MOFs and their composites for the removal of sulfur from fuel oil via ODS and ADS processes. Additionally, physicochemical properties of MOFs, mechanism, pros and cons of both process, regeneration, and future challenges have been discussed briefly. Moreover, current limitations and future prospective are also discussed.     

Synthesis of linseed oil based biodegradable homo and copolymers: role as multifunctional greener additives in lube oil

Abstract

Homopolymer of linseed oil and its four copolymers with styrene, 1-decene, isodecyl acrylate and octyl acrylate, respectively, have been synthesized in this present context. The prepared polymers are characterized by NMR and FTIR spectroscopy. The molecular weights have been measured by gel permeation chromatography. Their effectiveness as pour point depressant (PPD), viscosity index improver (VII) and their shear stability in terms of permanent shear stability index have been evaluated in lube oil. The copolymers acted as better PPDs than the homopolymer whereas the homopolymer of linseed oil excelled as VII. Further it was observed that all the prepared polymers were stable enough under severe mechanical shear.     

Surfactant-mediated wetting and spreading: Recent advances and applications

Surfactant-mediated wetting and spreading are ubiquitous. Understanding of these phenomena in-depth allows precise tailoring of wetting performance which can contribute to global challenges in the food supply chain, healthcare, ecology and industrial processes. The first part of this review shows how surfactants can be used to improve the efficacy of fertilisers and pesticides in agriculture, enhanced oil recovery, treatment of lung diseases and extinguishing fires involving flammable liquids. The second part provides analysis of recent studies on wetting and spreading over solid substrates. It includes discussion on the effect of surfactants on the outcome of the impact of liquid drops, the wetting state after impact, autophobic effect and spreading kinetics for both partial and complete wetting, including superspreading. Perspectives of future development in the area of surfactant-assisted wetting and spreading on solid substrates are outlined.     

Immobilization of Eversa® Transform via CLEA Technology Converts It in a Suitable Biocatalyst for Biolubricant Production Using Waste Cooking Oil

The performance of the previously optimized magnetic cross-linked enzyme aggregate of Eversa (Eversa-mCLEA) in the enzymatic synthesis of biolubricants by transesterification of waste cooking oil (WCO) with different alcohols has been evaluated. Eversa-mCLEA showed good activities using these alcohols, reaching a transesterification activity with isoamyl alcohol around 10-fold higher than with methanol. Yields of isoamyl fatty acid ester synthesis were similar using WCO or refined oil, confirming that this biocatalyst could be utilized to transform this residue into a valuable product. The effects of WCO/isoamyl alcohol molar ratio and enzyme load on the synthesis of biolubricant were also investigated. A maximum yield of around 90 wt.% was reached after 72 h of reaction using an enzyme load of 12 esterification units/g oil and a WCO/alcohol molar ratio of 1:6 in a solvent-free system. At the same conditions, the liquid Eversa yielded a maximum ester yield of only 34%. This study demonstrated the great changes in the enzyme properties that can be derived from a proper immobilization system. Moreover, it also shows the potential of WCO as a feedstock for the production of isoamyl fatty acid esters, which are potential candidates as biolubricants.